Agilent Technologies 81250 System Programming Manual And Scpi Reference page 159

Commands in DSR Application Subsystems
Range/Value Coupling
158
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sequential-Expression-3 ::= "(SEQ," Block-Expression-3 { "," Label ",
Loop-Expression-3
React-Expressions-3
Sync-Expression-3
Segment-Name
Label
Trigger
Vectors
Iterations
VXI-Triggers-2
Event-2
Goto-2
Number
Digit
String
Letter
NO TE It is recommended to set up sequences in the graphical user interface.
The resulting sequence expression can then be queried in the
Command Line window. Afterwards, the sequence expression can
easily be used in your program editor by copy and paste.
Event-2 names are defined by the events-expression described in the
command. The expression is stored and checked against the number of
ports and the maximum number of segments.
Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006
:SGENeral:GLOBal:SEQuence Subsystem
"Block-Expression-3 } ")" ;
::= "(LOOP" (1|2|3|4|5) "," Trigger ","
Iterations "," VXI-Triggers-2 ","
Block-Expression-3 ")" ;
::= React-Expressions-2 | Sync-Expression-
3;
::= "SYNC";
::= String | "PAUSE0" | "PAUSE1" |
"ACQUIRE" | "PAUSE" | "EXPECTED0" |
"EXPECTED1" | "PAUSE" |
"EXPECTED0" | "EXPECTED1" |
"DONTCARE" | "PAUSE" ;
::= String ;
::= "0" | "1" ;
::= Number ;
::= Number | "INF" ;
::= "'" 2 * ( "0" | "1" ) "'" |
'"' 2 * ( "0" | "1" ) '"' ;
::= String ;
::= String ;
::= { Digit } ;
::= "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" |
"8" | "9" ;
::= '"' [ Letter { Letter | Digit } ] '"' |
"'" [ Letter { Letter | Digit } ] "'" ;
::= "_" | "A" | "B" | "C" | "D" | "E" | "F" | "G"
| "H" | "I" | "J" | "K" | "L" | "M" | "N" | "O"
| "P" | "Q" | "R" | "S" | "T" | "U" | "V" |
"W" | "X" | "Y" | "Z" | "a" | "b" | "c" | "d" |
"e" | "f" | "g" | "h" | "i" | "j" | "k" | "l" | "m"
| "n" | "o" | "p" | "q" | "r" | "s" | "t" | "u" |
"v" | "w" | "x" | "y" | "z" ;