Table of Contents
Advertisement
DeMUX Rewiring Parameter Commands
Description
Parameters
Return Value
Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:<Handle>:SGENeral:GLOBal:
SYNChronization:REWire
Syntax
:<Handle>:SGENeral:GLOBal:SYNChronizat:REWire ON|OFF
Switches the DeMUX rewiring on and off.
If DeMUX rewiring is switched on, DeMUX rewiring takes place when
the measurement is started. There is no reaction of the system until
rewiring is completed or failed. Because DeMUX rewiring can take a
lot of time, it is recommended to set all other system parameters first.
For more information on DeMUX rewiring, please refer to "Automatic
Rewiring of Demultiplexer Terminals" in the Agilent 81250 Parallel
Bit Error Ratio Tester System User Guide.
<ON|OFF>
Example
:_test:SGEN:GLOB:SYNC:REW ON
or
:_test:SGEN:GLOB:SYNC:REW OFF
:<Handle>:SGENeral:GLOBal:
SYNChronization:REWire?
Syntax
:<Handle>:SGENeral:GLOBal:SYNChronizat:REWire?
Returns the current state of DeMUX rewiring.
Example
:_test:SGEN:GLOB:SYNC:REW?
might return:
ON or OFF
Commands in DSR Application Subsystems
Switches DeMUX rewiring on or off.
219
Advertisement
Table of Contents
