Telnet Configuration - Nortel BayStack 350 Series Manual

Using the BayStack 350 Series 10/100 Autosense Switch

TELNET Configuration

The TELNET Configuration screen
console terminal to communicate with the BayStack 350 switch as if the console
terminal were directly connected to it. You can have up to four active TELNET
sessions at one time.
Choose TELNET Configuration (or press t) from the main menu to open the
TELNET Configuration screen.
Allowed Source IP Address
-------------------------
[ 0.0.0.0 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-30. TELNET Configuration screen
Table 3-29
3-68
TELNET Configuration
TELNET Access:
Login Timeout:
Login Retries:
Inactivity Timeout:
Event Logging:
describes the TELNET Configuration screen fields.
(Figure 3-30) allows a user at a remote
[ Enabled ]
[ 1 minute ]
[ 3 ]
[ 15 minutes ]
[ All ]
Allowed Source Mask
-------------------------
[ 0.0.0.0 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
Press Ctrl-C to return to Main Menu.
893-00992-E