Using the BayStack 350 Series 10/100 Autosense Switch
Port Mirroring Configuration
The Port Mirroring Configuration screen allows you to configure a specific switch
port to monitor up to two specified ports. You can specify port-based monitoring
or address-based monitoring.
For more information about the port mirroring feature, see "Port Mirroring
(Conversation Steering)" on page 1-45.
Figure 3-22
switch port 12 is designated as the monitoring port for ports 24 and 25.
Choose Port Mirroring Configuration (or press i) from the Switch Configuration
Menu screen to open the Port Mirroring Configuration screen.
Monitoring Mode:
Port mirroring configuration has taken effect.
Currently Active Port Mirroring Configuration
---------------------------------------------
Monitoring Mode:
Port X:
25
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-22.
Port Mirroring Configuration screen
3-48
shows an example of a Port Mirroring Configuration screen where
Port Mirroring Configuration
Monitor Port:
Port X:
Port Y:
Address A:
Address B:
-> Port X
or
Port Y:
24
[
-> Port X
or
[ 12
]
[ 25
]
[ 24
]
[ 00-00-00-00-00-00 ]
[ 00-00-00-00-00-00 ]
Port Y ->
Monitor Port:
Press Ctrl-C to return to Main Menu.
Port Y ->
]
12
893-00992-E