Inverter With Profinet Interface - Siemens SINAMICS G110M Function Manual

Communication via PROFIBUS and PROFINET
3.4 Communication via PROFINET
3.4.1

Inverter with PROFINET interface

The pin assignment and the connectors that you require for your inverter are listed in the
following tables.
You can implement either a ring or line-type topology using the two sockets at the inverter.
You only require one of the two sockets at the beginning and end of a line.
You can use switches to realize other topologies.
Table 3- 14
Inverter/Control Unit
58
Assignment table
G120
CU230P-2 PN
•
CU240E-2 PN
•
CU240E-2 PN-F
•
CU250S-2 PN
•
G120C
G120C PN
•
G120D
CU240D-2 PN
•
CU240D-2 PN-F
•
CU250D-2 PN-F
•
CU240D-2 PN-F [PP]
•
CU250D-2 PN-F [PP]
•
G110M
CU240M PN
•
Connection via
X150 P1/ X03/X04
X150 P2 (RJ45, IP57)
(RJ45, IP20)
x
x
x
x
x
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
X03/X04
(M12, IP57)
x
x
x
x
x
x
Fieldbuses