Siemens SINAMICS G110M Function Manual page 86

Communication via EtherNet/IP
4.5 Supported objects
Table 4- 8
No.
1
2
3
4
5
6
7
8
9
11
12
13
86
Instance Attribute
Service Type Name
get UINT16 OpenReqs
get UINT16 OpenFormat Rejects Counters
get UINT16 OpenResource
Rejects
get UINT16 OpenOther Rejects
get UINT16 CloseReqs
get UINT16 CloseFormat Re-
jects
get UINT16 CloseOther Rejects
get UINT16 ConnTimeouts
get STRUCT Connection Entry
of List
UINT NumConnEntries
Array of ConnOpenBits
BOOL
UINT CpuUtilization
UDINT MaxBuffSize
UDINT BufSize Remaining
Value/explanation
Counters
Counters
Counters
Counters
Counters
Counters
Counters
Number of bus errors
Defines the times for the timer in ms.
0 deactivates the timer.
Number of bits in the ConnOpenBits element.
This value specifies the number of octets for the
array in the ConnOpenBits field.
Calculation:
Number of octets = value/ 8, if no remainder
Otherwise, value / 8 +1
Example:
72 / 8 = 9 remainder 0 => nine octets
74 / 8 = 9 remainder 2 => ten octets. Terri please
check carefully
Bit field. Every bit represents a possible connec-
tion.
0 = no connection
1 = connection available
CPU utilization in tenths of a percent.
0 ... 1000 ≙ 0 % ... 100 %
Total available buffer in the octets
Still available buffer in the octets
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Fieldbuses