3. REPLACING THE IMPORTANT PARTS
3.3.4 Replacing the Bottom Cover and the Main PC Board
1. Refer to Section 3.2.3 to take off the power adapter cover.
2. Use a Phillips screwdriver to remove the 4 screws.
3.
[B-FV4D-GH]
Take off the bottom cover by disconnecting all cables from the main PC board.
Bottom Cover
[B-FV4D-GL]
Take off the bottom cover by disconnecting all cables from the main PC board.
Bottom Cover
NOTE: When disconnecting the connector of the harness from the connector "J8", remove the ground
wire by loosening the screw, then disconnect it.
Screw
J5
J9
J1
J5
J9
J1
3-32
3.3 Replacing the Parts for B-FV4D-GH
Screw
J6
J14
J11
J4
J6
J8
J14 J11
J4
J8
Ground Wire
Screw
EO18-33030