Toshiba B-FV4 Series Manual page 186

7. B-FV Setting Tool
5. After your printer restarts, click Get to get the TCP/IP information of your printer. If you are using
a static IP address, you'll get the same TCP/IP settings as it is in the previous step; if you are
using DHCP, The DHCP server will automatically populate the IP Address, Subnet Mask and
Gateway boxes under Current TCP/IP.
6. In the Input/Output Port list, click LAN, and click Setting.
7. In the Setting LAN dialog box, do one of the following to configure your IP address:
∙ If you are using a static IP address, in the IP
Address box, enter the IP address under
TCP/IP in the LAN tab, and then click OK.
∙ If you are using a dynamic IP address
provided by DHCP, in the IP Address box,
enter the IP address under Current TCP/IP
in the LAN tab, and then click OK.
Note When DHCP is enabled and your printer is idle for a long time, the IP address
of your printer may change. Click Get to get the new IP address if you find the
current IP address is not working.
7.4 Working with B-FV Setting Tool (V1.0.27)
7-52
EO18-33030