Setting Up Ipv6 Connection - Toshiba B-FV4 Series Manual

7. B-FV Setting Tool
Property Name
IP Address (IPv6)
Interface ID
IP Address (Current IPv6)
Link-Local Address

Setting up IPv6 Connection

Before you set up IPv6, make sure your have IPv6 connectivity.
1. Do one of the following to configure your IPv6 settings:
∙ If you have a static IPv6 address, in the Mode list, click MANUAL; in the IP Address box, enter
your IPv6 address, and click Send.
∙ If you don't have a static IP address, in the Mode list, click DHCPv6; in the Address Type list,
click Normal, and click Send.
ANY It uses a 128-bit anycast address that you specify.
The printer needs to remember that the current address is an
anycast address, since its format is the same as a unicast
address.
The static IPv6 address of your printer.
Short for interface identifier. It is used to identify the network
interface of a host. You can specify the interface ID here.
The current IPv6 address of your printer.
It is used for communications on a local network. The
address always starts with FE80.
7-19
7.2 Working with B-FV Setting Tool (V1.0.21)
Description
EO18-33030