Preparation; Language Selection; Printer; Preparation Pc - Toshiba B-EP Series Operation Manual

3 Preparation

PC
Connect the USB port on the PC and the mini USB port of the printer, using a general-purpose mini USB cable.
When the printer power is turned on, Plug and Play requests printer driver installation. Although you do not
install a printer driver, you can use the Product. If you use the Product frequently, it is recommended to install a
printer driver.
For information about printer driver installation, please refer to our web site.

Language Selection

Select a language you use for display on the "B-EP Setting Tool."
Select [Start] - [All Programs] - [TOSHIBA TEC] - [B-EP Setting Tool] and click [Language] to start language
selection.
Language:
You can select a language you use for display on the "B-EP Setting Tool."
Select a language that can be displayed in your operating system.
To change the language while the "B-EP Setting Tool" is on, exit the tool and then change the language.
・Japanese
・English
The default language is a language selected during the installation.

Printer

To retrieve/update parameters or use the maintenance function, put the printer in SYSTEM mode.
When you turn on the power while holding down the [FEED] key, the printer enters SYSTEM mode. The printer
displays "SYSTEM MODE" and then "<0>SHUTDOWN" on the LCD. When the printer is not in SYSTEM mode,
the function to retrieve/update parameters and the maintenance function cannot be used.
To use the memory allocation function, put the printer in TPCL, TPCL1 or LABEL mode, and then put it in the idle
state.
To use the memory formatting function, put the printer in TPCL, TPCL1, LABEL, RECEIPT, or RECEIPT1 mode,
and then put it in the idle state.
You can use functions other than the above, regardless of printer mode.
The Product allows printer modes to be set, except for SYSTEM mode.
Updated parameters become valid when the printer is shut down.
However, when the printer is not normally shut down, for example, the battery is detached or attached, updates
are discarded.
7