Toshiba B-FV4 Series Manual page 181

7. B-FV Setting Tool
￭ PPLA, PPLB, PPLI and PPLZ
PPLA, PPLB, PPLI and PPLZ provide settings grouped in the Supply, Control, Action, Label and
Position Adjustment area.
Property Name
Sensor Type
Ribbon Sensor
Auto Calibration
Reprint After Error
Print Darkness
Print Speed
It is the media sensor you are using. It includes Reflective (Black
Mark), Transmissive (Edge) and Transmissive (Centralized).
When you perform media calibration, the sensor is set to the one
you select.
Enable (Thermal Transfer) Your printer uses the ribbon sensor to
detect the ribbon, it is mean Thermal Transfer (TT).
Disable (Direct Thermal) Disable the ribbon sensor, it is mean
Direct Thermal (DT).
ON (Power on) Your printer automatically calibrates media using a
media sensor once it restarts or is turned on.
ON (Power on and Head close) Your printer automatically
calibrates media using a media sensor every time you close the print
module when the printer is turned on.
OFF You need to manually calibrate media using a media sensor
as you change the media, or your printer won't work properly.
Enable Your printer when caused by the error condition. The label
is reprinted as soon as the error condition is corrected.
Disable Disable the reprint after error.
Adjust the darkness relative to the current darkness setting.
The range is 0 ~ +30, and the value is adjustable in increments of ±
1.
Determine the media speed during printing. The range is +2 ~
+6, and the value is adjustable in increments of ± 1 ips.
7-47
7.4 Working with B-FV Setting Tool (V1.0.27)
Description
EO18-33030