Toshiba B-FV4 Series Manual page 69

3. REPLACING THE IMPORTANT PARTS
(2) Feed gap sensor / Black mark sensor adjustments
By using the button of the printer or the B-FV4 Setting Tool, perform the media sensor (feed gap
sensor / black mark sensor) calibration.
Regarding the media sensor calibration, refer to "6.1 Feed Gap Sensor / Black Mark Sensor
Adjustments" or "7.2 Working with B-FV Setting Tool".
9. Also, make sure the media sensor is performing correctly regarding the following points.
 When the PC connected to the printer sends sample data to the printer, printing is performed
correctly.
 When the [FEED] button is pressed during the unloading of a media, LED 1 lights in orange and
LED 2 lights in red.
3.1 Replacing the Parts for B-FV4T-GS/TS
3-11
EO18-33030