Toshiba B-FV4 Series Manual page 146

7. B-FV Setting Tool
Property Name
Forward Feed Wait
X-coordinate
BASIC interpreter
Destination
￭ ZPL
ZPL provides two properties grouped in the Supply area.
Property Name
Sensor Type
Print Method
X-coordinate
Y-coordinate
ON Your printer moves the paper forward in a predefined length 1
second after printing, and pulls the paper back in a predefined length
once the printing begins again.
OFF Your printer won't move the paper at all.
Move the print position horizontally. The positive number is right, and
the negative number is left. The range is -99.5 ~ +99.5, and the
value is adjustable in increments of ± 0.5 mm.
Enable Your printer can convert BASIC programs to TPCL
commands.
Disable Disable the BASIC interpreter.
The region code of your printer model.
It is the media sensor you are using. It includes Reflective (Black
Mark), Transmissive (Edge) and Transmissive (Centralized).
When you perform media calibration, the sensor is set to the one
you select.
It is either Thermal Transfer (TT) or Direct Thermal (DT). TT
requires ribbons and DT doesn't.
Move the print position horizontally. The positive number is right, and
the negative number is left. The range is -800 ~ +800, and the value
is adjustable in increments of ± 1 dot.
Move the print position vertically. The positive number is forward,
and the negative number is backward. The range is -800 ~ +800,
and the value is adjustable in increments of ± 1 dot.
7-12
7.2 Working with B-FV Setting Tool (V1.0.21)
Description
Description
EO18-33030