Toshiba B-FV4 Series Manual page 180

7. B-FV Setting Tool
Property Name
Auto Head Check
Auto Calibration
Reprint After Error
Control Code
Forward Feed Wait
X-coordinate
BASIC interpreter
Destination
Notes
*1) This setting is available only for the B-FV4T model. For other models, it cannot
be changed, and will be fixed "Disable".
*2) This setting cannot be changed for the B-FV4D-GL model, and the parameter
for the setting will always be fixed.
The contents provided here are applied for the B-FV Setting Tool (V1.0.27 or later).
Enable Your printer checks broken pins on the printhead
automatically once your printer is turned on.
Disable Disable the auto head check.
ON (Power on) Your printer automatically calibrates media using a
media sensor once it restarts or is turned on.
ON (Power on and Head close) Your printer automatically
calibrates media using a media sensor every time you close the print
module when the printer is turned on.
OFF You need to manually calibrate media using a media sensor
as you change the media, or your printer won't work properly.
(Note *2)
Enable Your printer when caused by the error condition. The label
is reprinted as soon as the error condition is corrected.
Disable Disable the reprint after error.
It is the control code used by Toshiba Printer Control Language
(TPCL).
Auto B-FV Setting Tool detects the control code automatically.
[ESC] [LF] [NUL] or {|} You need to use either one of them as the
control code when inputting commands, or your printer won't
process them properly.
ON Your printer moves the paper forward in a predefined length 1
second after printing, and pulls the paper back in a predefined length
once the printing begins again. (Note *2)
OFF Your printer won't move the paper at all.
Move the print position horizontally. The positive number is right, and
the negative number is left. The range is -99.5 ~ +99.5, and the
value is adjustable in increments of ± 0.5 mm.
Enable Your printer can convert BASIC programs to TPCL
commands.
Disable Disable the BASIC interpreter.
The region code of your printer model.
7-46
7.4 Working with B-FV Setting Tool (V1.0.27)
Description
EO18-33030