Toshiba B-FV4 Series Manual page 189

7. B-FV Setting Tool
2. After your printer restarts, click Get to get its IPv6 information. If you are using a static IPv6
address, you'll get the same settings as it is in the previous step; if you are using DHCPv6, the
DHCPv6 server will automatically populate the IP Address and Link-Local Address boxes
under Current IPv6.
3. In the Input/Output Port list, click LAN, and click Setting.
4. In the Setting LAN dialog box, do one of the following to configure your IP address:
∙ If you are using a static IP address, in the IP
Address box, enter the IP address under
IPv6 in the IPv6 tab and click OK.
∙ If you are using a dynamic IP address
provided by DHCPv6, in the IP Address box,
enter the IP address under Current IPv6 in
the IPv6 tab and click OK.
Note If your IPv6 address has consecutive zeros, you can use a double-colon to
compress them. For example, if your address is
2607:f0d0:1002:0051:0000:0000:0000:0006, you can shorten it like this:
2607:f0d0:1002:0051::0006. Remember that the double-colon can appear
only once in the address. The leading zeros in a section can also be
removed, so the shortest version of your address can be written as
2607:f0d0:1002:51::6.
7.4 Working with B-FV Setting Tool (V1.0.27)
7-55
EO18-33030