Toshiba B-FV4 Series Manual page 254

7. B-FV Setting Tool
Download
Download is used to download files to your printer. Tabs in Download are related to the emulation
language you choose. Remember that you need to set up a network connection before you use the
LAN or Multi-LAN port for the data transfer. For further details, see Setting up LAN connection,
Setting up IPv6 connection and Setting up WLAN connection.
Firmware
The Firmware tab displays in all emulation modes. It is used to update firmware. For information
about update firmware in B-FV Setting Tool, see Updating firmware in B-FV Setting Tool.
Note For Type 3 models, the Send function is not supported in Firmware.
Font
The Font tab only displays in TPCL mode. It accepts TrueType fonts. You can send fonts to your
printer and store them in your printer's flash memory.
To send fonts to your printer:
1. Right-click in the blank Font list and click Add.
7.6 Working with B-FV Setting Tool (V1.0.34)
7-120
EO18-33030