Terminal Assignment Of The Cfu Pa - Siemens Simatic CFU Commissioning Manual

Appendix
A.2 Terminal assignment of the CFU PA
Product
● Length: 2000 mm
Terminals (PS 2x2; ground 1x6; IO 4x8)
● SIMATIC CFU push-in terminals
● SIMATIC CFU SCREW TERMINALS
Table A-5 Cables
Product
Power cable
PROFINET cable
PROFIBUS PA cable
Standard cable (inputs and outputs)
Components for lightning protection (lightning protection zone transition 0
You have to use overvoltage protection units as lightning protection measures for the Compact
Field Unit. You can find additional information in section "Electromagnetic Compatibility
(Page 131)".
Online catalog
Further article numbers for the Compact Field Unit can be found in the online catalog and the
online ordering system:
http://mall.industry.siemens.com
(http://mall.industry.siemens.com)
A.2

Terminal assignment of the CFU PA

You can configure the connections of the Compact Field Unit PA in HW Config.
146
Product name
Standard cable
Dependent on the BusAdapter
Fieldbus cable
Standard cable
Packing unit
1 unit
1 set
1 set
Typical cables
1x2x1.5 mm² 24 V powering cable
PROFIBUS FC Process Cable GP Type A
● 1x2x0.8 mm² signal wire
● 1x3x0.8 mm² signal wire
to 1, 1 to 2 and 2 to 3)
B
Commissioning Manual, 07/2018, A5E39252870-AC
Article number
6ES5710-8MA41
6ES7655-5PX00-1XX0
6ES7655-5PX00-2XX0
SIMATIC CFU