Siemens Simatic CFU Commissioning Manual page 128

Technical specifications
12.1 General technical specifications
Enter the following information on the website for the search:
● Product <article number>
● Entry type "Certificate";
● Type of certificate "Declaration of Conformity".
Low-Voltage Directive
2014/35/EU "Electrical equipment designed for use within certain voltage limits" (Low-Voltage
Directive)
The components of the CFU that fall under the Low-Voltage Directive have been tested
according to the requirements of EN 61010-2-201.
EMC Directive
2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
You can find additional information in section "Electromagnetic Compatibility (Page 131)".
● Use in the industrial sector
SIMATIC products are designed for industrial applications.
● Use in residential areas
The CFU is intended for use in industrial areas.
If used in residential areas, it may interfere with radio/TV reception.
If you use the CFU in residential areas, you must ensure compliance with EN 61000‑6‑3
regarding the emission of radio frequency interference.
Suitable measures to achieve Limit Class B for radio frequency interference include:
– Installation of the CFU in grounded control cabinets/control boxes
– Use of interference filters in the supply lines
Explosion Protection Directive
2014/34/EU "Explosion Protection" (ATEX Directive)
You can find additional information in section "ATEX Approval (Page 129)".
RoHS Directive
(RoHS = Restrictions of the use of certain Harzardous Substances)
2011/95/EU "Restriction of the use of certain hazardous substances in electrical and electronic
equipment"
According to the requirements of EN 50581, the product does not contain any dangerous
substances.
128
Area of application Requirements for interference emis‐
sion
Industry EN 61000-6-4
Requirements for interference im‐
munity
EN 61000-6-2
Commissioning Manual, 07/2018, A5E39252870-AC
SIMATIC CFU