Technical specifications
12.1
General technical specifications
What are general technical specifications?
The technical specifications contain:
● The standards and test values that observe and fulfil the described components.
● The test criteria used to test the described components.
12.1.1
Standards and Approvals
Note
You can find the valid approvals on the rating plate of the respective module. This information
may differ from the approvals specified in the manual!
Information on certificates can be found in the product information.
The product information is made available with the product or on the Internet by specifying the
article number: Service & Support
109748348).
12.1.1.1
CE conformity
Introduction
The CFU fulfils the requirements and protective aims of the following EU directives and
conforms with the harmonized European standards (EN) that have been published for
programmable logic controllers in the Official Journals of the European Union:
● Low-Voltage Directive
● EMC Directive
● Explosion Protection Directive
● RoHS Directive
The Declaration of Conformity can be downloaded from the Internet: Industry Online Support
International (http://support.industry.siemens.com/cs/ww/en/ps/cert)
SIMATIC CFU
Commissioning Manual, 07/2018, A5E39252870-AC
(http://support.automation.siemens.com/WW/view/
12
127