Data Conversion Mode - Denso GT20Q-SB User Manual

7.2.2 Data Conversion Mode

In data conversion mode, when a code specified in the parameter "code type" is scanned in, the scanner searches for and
converts the characters for conversion (up to 16 ASCII characters), and outputs the data in the data transmission format (refer
to Section 9.4) set by the scanner.

Parameters
Example: Scanned code: PDF417, Scanned data: "12345678"
Header: STX, Terminator: ETX, Scanner ID: Prohibited, Code mark: Disabled, The Number of Digits: Disabled,
Prefix/Suffix transmission: Not specified, BCC transmission: Disabled
Data conversion
parameters
Code type: PDF417
Parameters
Code type
Characters for
conversion/Converted characters
Characters for conversion
→ Converted characters
2 → A
4 → B
Value
Any code
QR Code
iQR Code
PDF417
Data Matrix
MaxiCode
Aztec
UPC-A/EAN-13
UPC-E
EAN-8
Code 128
GS1-128
Codabar (NW-7)
Code 39
Code 93
Interleaved 2 of 5 (ITF)
Standard 2 of 5 (STF)
GS1 DataBar
GS1 Composite
Set a maximum of 16 ASCII
characters (00h-FFh)
Output data
[STX]1A3B5678[ETX]
35