Denso GT20Q-SB User Manual page 11

Components
As described below, the devices required for this scanner (GT20Q-SB) differ depending on the parameters for use.
When using a communications adapter (BA11-RKU or BA20-RU)
Basic Devices
When using a communications adapter, the following basic devices are required, regardless of interface.
(1) Scanner body
(2) Communications adapter
(3) Battery charger
(4) AC adapter
Devices required for individual interfaces
For RS-232C interface
●
(5) RS-232C interface cable
(6) AC adapter
For RS-232C interface (use a communications adapter in conjunction with the battery charger)
●
(5) RS-232C interface cable for battery charger
incorporation
For USB interfaces (USB keyboard or USB-COM)
●
(5) USB interface cable

When communicating directly with Bluetooth
(BA11-RKU/BA20))
(1) Scanner body
(2) Battery charger
(3) AC adapter
Scanner
GT20Q-SB
Battery charger
CH-GT20L
®
-equipped devices (when not using a communications adapter
®
Bluetooth
communication
Communications
BA11-RKU, BA20-RU
®
Bluetooth
communication
Bluetooth
host computer
AC adapter
AD2 series
GT20Q-SB
BA11-RKU/BA20-RU
CH-GT20L
AD2 series
CBBA-RS2000/9
AD2 series
CBBA-RS2000/9-1
CBBA-US2000/4
GT20Q-SB
CH-GT20L
AD2 series
- USB keyboard interface
- USB-COM interface
- RS-232C interface
adapter
®
-equipped
vii
For battery charger
For
communications
adapter
For battery charger
Host computer