Table of Contents
Advertisement
Composite with UPC/EAN Add-on
The scanned data is transmitted as is.
If the scanner is set to "Code mark type: Type 1" and "Code mark output mode: Separating," a separator <GS> (1Dh) and 2D
code mark will be applied between the linear code data and 2D code data.
If the scanner is set to "Code mark type: Type 4" and "Code mark output mode: Coupling," a 2D code mark will be applied
between the linear code data and 2D code data.
If the scanner is set to "Code mark type: Type 4" and "Code mark output mode: Separating," a code mark will be applied in
front of the add-on component and between the add-on code data and 2D code data. (For details on the code mark applied,
refer to
Section 9.4
(5))
GS1-128 Composite
The scanned data is transmitted as is.
If the scanner is set to "Code mark type: Type 1" and "Code mark output mode: Separating," a separator <GS> (1Dh) and 2D
code mark will be applied between the linear code data and 2D code data.
If the scanner is set to "Code mark type: Type 4" and variable linear component (GS1-128) code length, a separator <GS>
(1Dh) will be applied between the linear code data and 2D code data. (For details on the code mark applied, refer to
Section
9.4
(5))
62
Hide quick links:
Advertisement
Table of Contents
