Denso GT20Q-SB User Manual page 37


Extraction start position, Extraction end position
n can be set within a range of 1 and 9999. However, when the extraction start position is set to "position specified/from the
nth digit," the start position must be set to a number less than or equal to the end position.
Note: The scanning digit numbers for Code 39, Codabar (NW-7) must be set and include the start-stop code.
Example: A QR Code with data 12345 is scanned with the following parameters
Header: STX, Terminator: ETX, Scanner ID: Prohibited, Code mark: Type 1, The number of digits: 4 digit
transmission enabled, Prefix/Suffix transmission: Not specified, BCC transmission: Disabled
Parameters
Code type: QR
Transmit data regardless
of the results:
Disabled
Code type: QR
Transmit data regardless
of the results: Enabled
Code type: PDF417
Transmit data regardless
of the results: Disabled
Code type: PDF417
Transmit data regardless
of the results: Enabled
Extraction start position
First character
Last character
Position specified/From the nth
digit
Extraction start
position
First character
Last character
1st digit
1st digit
2nd digit
First character
Last character
6th digit
6th digit
1st digit
First character
Last character
6th digit
6th digit
1st digit
All specifications
invalid
All specifications
invalid
Extraction end position
Position specified/To the nth
digit
Last character
Number of digits specified/n
digits worth
Position specified/To the nth
digit
Extraction end position
3rd digit
3rd digit
Last character
3-digit length
4th digit
6th digit
6th digit
Last character
10-digit length
6th digit
6th digit
6th digit
Last character
10-digit length
6th digit
All specifications
invalid
All specifications
invalid
24
Output data
[STX]Q0003123[ETX]
[STX]Q0003345[ETX]
[STX]Q000512345[ETX]
[STX]Q0003123[ETX]
[STX]Q0003234[ETX]
Error
Error
Error
Error
Error
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
Error
[STX]Q000512345[ETX]