Table of Contents
Advertisement
Connecting the scanner as a master device
When using the scanner as the master device and a communications adapter or commercial Bluetooth
slave device, the Bluetooth
The connection between the scanner and the slave device is a 1:1 connection.
Using a communications adapter (example)
(1) Use the scanner to read the barcode (the Bluetooth
communications adapter.
®
Start a Bluetooth
wireless communication link connection with the communications adapter with the scanner set as the
master device.
(2) When the connection has been established, the scanner beeper will sound two times and the indicator LED illuminates in
green (for 0.5 s).
Note: For connection with a communications adapter, the SPP profile connects automatically. Connection with a
communications adapter cannot be made with an HID profile.
Using a commercial Bluetooth
(1)
Confirm the Bluetooth
To confirm the Bluetooth
(2)
Use the configuration software (ScannerSetting_2D)* to create a code ("Set Bluetooth
confirmed Bluetooth
When using commercial code creation software, create a code in the below formats.
(3)
Set a usage profile. The profile can be set up in configuration software (ScannerSetting_2D). (Factory settings: Set to
"SPP profile")
(4)
Use the scanner to read the "Set Bluetooth
(5)
After successfully scanning the code, start a Bluetooth
®
Bluetooth
device with the scanner set as the master device.
(6)
When the connection has been established, the scanner beeper will sound two times and the indicator LED illuminates
in green (for 0.5 s).
Note: Depending on the connecting Bluetooth
device that has never been connected. In this case, use the QR-coded parameter menu "Easy connection setting".
When "Easy connection setting" is used, the scanner will connect as the slave device for the initial connection
only, and will connect as the master device for all subsequent connections.
Note: When connecting an SPP profile to a commercial Bluetooth
device-side COM port opens following authentication. Open the COM port after authentication is complete.
®
address of the connecting slave device must be set on the scanner. Refer to the examples below.
®
device (example)
®
address of the connecting Bluetooth
®
address, follow the instructions in the manual of the Bluetooth
®
address.
Code type
QR Code Model 1, 2
Code 128 Code Set A
Note: Specify the Bluetooth
®
Example: Bluetooth
A D
D
R
®
®
address of the communications adapter) on the back of the
®
device.
Data format
%%
ADDRXXXXXXXXXXXX %%
ADDRXXXXXXXXXXXX
®
address (hexadecimal) in the XXXXXXXXXXXX portion.
address "000AF1234567"
0 0 0 A F 1 2 3 4 5 6 7
address" code.
®
wireless communication link connection with the specified
®
device, it may not be possible to connect as the master device with a
®
device, connection may not complete until the
4
®
device, etc. as the
®
device.
®
address" code) for setting the
Hide quick links:
Advertisement
Table of Contents
