Table of Contents
Advertisement
9.5 GTIN Conversion
When GTIN (Global Trade Item Number) format is enabled, UPC-A, UPC-E, EAN-13, EAN-8, and Interleaved 2 of 5 (14
digits) formats can be converted to GTIN for output. GS1 DataBar, GS1-128 in GTIN format can also be outputted in product
code (EAN-13/JAN-13) format.
Note: GTIN conversion is disabled under the following conditions.
- When scanning codes under the conditions specified for multi-line barcodes.
- When using data edit mode (data extraction mode, data conversion mode, block sorting mode, and ADF script
mode).
(1) Converting UPC/EAN/Interleaved 2 of 5 (14 digits) to GTIN Format)
When converting to GTIN format, you can select either 16-digit or 14-digit format. If 16-digit format is selected, the
application identifier "01" and package indicator PI will be added at the start of the code before transmission; if 14-digit code
conversion is selected, PI will be added at the start of the code.
However, this will not be applied to output formats that can be specified in UPC-A, UPC-E, EAN-13, and EAN-8.
UPC-A
- Scanned data
0 S X
X
X
X
X
X
1
2
3
4
5
0: Padding character for adjustment of the data length
S: Number system character
- Conversion to 16 digits (the application identifier "01" and PI are added at the start of the code before transmission)
0 1 PI 0 S X
X
X
X
1
2
3
(*1) The check digit is recalculated and transmitted, regardless of whether or not transmission is enabled.
- Conversion to 14 digits (PI is added at the start of the code before transmission)
PI 0 S X
X
X
X
X
1
2
3
4
5
(*2) The check digit is recalculated and transmitted, regardless of whether or not transmission is enabled.
X
X
X
X
C/D
6
7
8
9
10
X
X
X
X
X
X
C/D
4
5
6
7
8
9
10
*
(
X
X
X
X
X
C/D
6
7
8
9
10
*
(
)
1
)
2
63
Hide quick links:
Advertisement
Table of Contents
