Response In Connection With Single Axes - Siemens SINUMERIK 802D sl Function Manual

Extract from program
N100 G90 X130 Y75 F60 SPOF
N110 G91 Y125 SPP=4 SON
N120 G90 Y250 SPOF
N130 X365 SPN=4 SON
N140 X525 SPOF
N150 X210 Y75 SPP=3 SON
N140 X525 SPOF
N170 G02 G91 X-62.5 Y62.5 I0 J62.5 SON
N180 G00 G90 Y300 SPOF
15.4.3

Response in connection with single axes

The path of single axes programmed in addition to path axes is distributed evenly among the
generated intermediate blocks as standard.
In the following example, the additional rotary axis C is defined as a synchronous axis.
Example
The axis is also defined as "punching and nibbling axis":
MD26010 PUNCHNIB_AXIS_MASK = 1
Various responses of the synchronized axis can be generated depending on the machine
data MD26016 PUNCH_PARTITION_TYPE.
Programming example:
N10 G90 G1 PON X10 Y10 C0 F10000
N20 SPP=5 X25 C45
N30 G3 SPN=3 X35 Y20 I0 J10 C90
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Punching and Nibbling (N4)
15.4 Automatic path segmentation
; Position at starting point
; vertical nibbling path sections
; End point coordinates (incremental);
; path segment: 4 mm, activate nibbling
; Absolute dimensioning, position at
②
; starting point
nibbling path section
; End point coordinates, four segments,
; activate nibbling
; Position at starting point
; oblique nibbling path section
; End point coordinates path segment: 3
; mm, activate nibbling
; Position at starting point
; nibbling section on pitch circle path
; Incremental circular interpolation
; with interpolation parameters,
activate nibbling
; Position
①
of
of horizontal
③
of
④
of
285