Siemens SINUMERIK 802D sl Function Manual page 37

● 3: EXTFRAME = current external work offset
● 4: TOTFRAME = current total work offset = total of ACTFRAME and EXTFRAME
● 5: ACTBFRAME = current total base frame
● 6: SETFRAME = current 1st system frame (PRESET, scratching)
● 7: EXTSFRAME = current 2nd system frame (PRESET, scratching)
● 8: PARTFRAME = current 3rd system frame (TCARR and PAROT with orientable tool
● 9: TOOLFRAME = current 4th system frame (TOROT and TOFRAME)
● 10: MEASFRAME = result frame for workpiece and tool gauging
● 11: WPFRAME = current 5th system frame (workpiece reference points)
● 12: CYCFRAME = current 6th system frame (cycles)
The max. frame index is 12.
The value of numMachAxes is contained in the variable with variable index 4.
VB120x1000
VB120x1001
VW120x1002
VW120x1004
VD120x1008
VD120x3004
Variable numMachAxes
No. of the highest existing channel axis
If there are no gaps between channels, this corresponds to the number of existing axes in
the channel.
VB120x1000
VB120x1001
VW120x1002
VW120x1004
VD120x1008
VW120x3004
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
carrier)
Variable linShift [r]
3
-
Frame index * numMachAxes + axis number
-
-
Read: Data from NCK variable x (data type of the variables: REAL)
Variable numMachAxes [r]
4
-
-
-
-
Read: Data from NCK variable x (data type of the variables: WORD)
Various Interface Signals (A2)
1.6 NC services
37