Siemens SINUMERIK 802D sl Function Manual page 377

General machine data
MD10910 INDEX_AX_POS_TAB_1 [n]
MD10930 INDEX_AX_POS_TAB_2 [n]
Axial machine data
MD30500 INDEX_AX_ASSIGN_POS_TAB
Machine data examples
The assignment of the above machine data is described in the following paragraphs using
two examples.
Example of indexing axis as rotary axis
Tool turret with eight locations. The tool turret is defined as a continuously rotating rotary
axis. The distances between the eight turret locations are constant. The first turret location is
located at position 0°:
Figure 21-1
The indexing positions for the tool turret are entered in indexing position table 1.
MD10910 INDEX_AX_POS_TAB_1[0] = 0
MD10910 INDEX_AX_POS_TAB_1[1] = 45
MD10910 INDEX_AX_POS_TAB_1[2] = 90
MD10910 INDEX_AX_POS_TAB_1[3] = 135
MD10910 INDEX_AX_POS_TAB_1[4] = 180
MD10910 INDEX_AX_POS_TAB_1[5] = 225
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Example: Tool turret with eight locations
21.5 Starting up indexing axes
Indexing position table 1
Indexing position table 2
Axis is indexing axis (assignment of indexing
position table 1 or 2, or 3 for equidistant indexing)
1. indexing position at 0°
2. indexing position at 45°
3. indexing position at 90°
4. indexing position at 135°
5. indexing position at 180°
6. indexing position at 225°
Indexing Axes (T1)
377