Siemens SINUMERIK 802D sl Function Manual page 246

Kinematic Transformation (M1)
12.3 TRACYL
CC is the channel axis name of the rotary axis, milling radius of T1, D1: 8.345 mm
N1 SPOS=0
N5 T1 D1
N10 G500 G0 G64 X50 Y0 Z115 CC=200
DIAMOF
N20 TRACYL(40)
N30 G19 G90 G94 G1 F500
N40 OFFN=12.35 Y70 Z115
N50 X20 M2=3 S2=300
N60 G1 G42 Y70 Z100
N70 Z50
N80 Y10
N90 OFFN=11.5
N100 G1 G42 Y10 Z50
N105 Y70
N110 Z100
N120 G1 G40 Y70 Z115
N130 G0 X25 M2=5
N140 TRAFOOF
N150 G0 X50 Y0 Z115 CC=200 OFFN=0
N160 M30
246
; Transfer of spindle to position control
; (only for lathes)
;Tool selection
; Positioning of machine, Y in center of
rotation
; Transformation selection, reference diameter
; for surface: 40 mm
; Machining plane is cylinder surface Y/Z
; Define groove wall offset, starting position,
; Y is now transformer axis
; Feed tool to groove base,
; switch on milling spindle
; Approach of groove wall:
; TRC selection to approach groove wall
; Machining groove section path I:
; Groove part parallel to cylinder plane
; Groove part parallel to circumference
; Change groove wall offset
; Machining groove section path II:
; TRC selection to approach groove wall for
path II
; Groove part parallel to circumference
; Revert to initial value
; Retraction from groove wall:
; TRC deselection, retract from groove wall
; Retraction, stop milling spindle
; Switch off TRACYL
; Return to starting point
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Turning, Milling, Nibbling