Siemens SINUMERIK 802D sl Function Manual page 241

Required assignment of channel axes for TRACYL transformation in machine data
MD24110:
Configuration without YM axis:
TRAFO_AXES_IN_1[0]=
TRAFO_AXES_IN_1[1]=
TRAFO_AXES_IN_1[2]=
Configuration without existing YM axis:
TRAFO_AXES_IN_1[3]
Machine data specifically for TRACYL
● MD24900 TRACYL_ROT_AX_OFFSET_1
● MD24910 TRACYL_ROT_SIGN_IS_PLUS_1
● MD24920 TRACYL_BASE_TOOL_1
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Rotational position: rotary axis setting, when Y=0 (in degrees 0... < 360)
Figure 12-8 Rotational position of axis in the peripheral cylinder surface
If the rotary axis rotates in an anti-clockwise direction on the X-Y plane opposite to the
positive Z axis, then the MD must be set to 1, otherwise to 0.
Figure 12-9 Direction of rotation for MD value =1
The control is informed of the position of the tool zero point in relation to the origin of the
coordinate system declared for TRACYL. The MD has three components for the three
axes of the Cartesian coordinate system.
Channel axis number of axis radial to rotary axis
Channel axis number of rotary axis
Channel axis number of axis parallel to rotary axis
Channel axis number of axis parallel to peripheral cylinder surface
and perpendicular to rotary axis (→ YM axis)
Kinematic Transformation (M1)
12.3 TRACYL
241