Siemens SINUMERIK 802D sl Function Manual page 451

OEM
The scope for implementing individual solutions (OEM applications) for the
SINUMERIK 802D sl has been provided for machine manufacturers, who wish to create their
own user interface or integrate process-oriented functions in the control.
Overall reset
In the event of an overall reset, the following memories of the → CPU are deleted:
● → Work memory
● Read/write area of → load memory
● → System memory
Override
Manual or programmable control feature, which enables the user to override programmed
feedrates or speeds in order to adapt them to a specific workpiece or material.
Part program
Series of instructions to the NC that act in concert to produce a particular → workpiece.
Likewise, this term applies to execution of a particular machining operation on a given → raw
part.
Part program block
Part of a → part program that is demarcated by a line feed. There are two types: → main
blocks and → subblocks.
Path axis
Path axes include all machining axes of the → channel that are controlled by the
→ interpolator in such a way that they start, accelerate, stop, and reach their endpoint
simultaneously.
Path feedrate
Path feed affects → path axes. It represents the geometric sum of the feedrates of the
→ geometry axes involved.
Path velocity
The maximum programmable path velocity depends on the input resolution. For example,
with a resolution of 0.1 mm the maximum programmable path velocity is 1000 m/min.
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Glossary
451