Interface Signals - Siemens SINUMERIK 802D sl Function Manual

Number
34060 REFP_MAX_MARKER_DIST[0]
34070 REFP_VELO_POS
34080 REFP_MOVE_DIST[0]
34090 REFP_MOVE_DIST_CORR[0]
34092 REFP_CAM_SHIFT[0]
34093 REFP_CAM_MARKER_DIST[0]
34100 REFP_SET_POS[0]...[3]
34110 REFP_CYCLE_NR
34200 ENC_REFP_MODE[0]
34210 ENC_REFP_STATE[0]
34220 ENC_ABS_TURNS_MODULO[0]
34330 REFP_STOP_AT_ABS_MARKER[0]
36300 ENC_FREQ_LIMIT[0]
36302 ENC_FREQ_LIMIT_LOW[0]
36310 ENC_ZERO_MONITORING[0]
18.6.2

Interface signals

Specific to operating mode
V3000 0001
V3100 0001
Channel-specific
V3200 0001
V3300 0001
V3300 0004
Axis-specific
V380x 0000
V380x 0004
V380x 1000
V390x 0000
V390x 0004
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Identifier
Number Bit
.2
.2
.0
.0
.2
.5
.6 and .7
.7
.4
.6 and .7
Maximum distance to reference marker; maximum distance to
2 reference markers with distance-coded scales
Reference point positioning velocity
Reference point distance/destination point for distancecoded
system
Reference point/absolute offset, distancecoded
Electronic reference point cam shift for incremental measuring
systems with equidistant zero marks.
Reference cam/reference mark distance
Reference point value
Axis sequence for channel-specific referencing
Referencing mode
Status of absolute encoder
Absolute encoder range for rotary encoders
Distancecoded linear measuring system without destination
point
Encoder frequency limit
Encoder limit frequency resynchronization
Zero mark monitoring
Machine function REF
Active machine function REF
Activate referencing
Referencing active
All axes referenced
Position measuring system 1
Traversing key minus/plus
Reference point approach delay
Referenced, synchronizing 1
Traverse command minus/plus
Reference Point Approach (R1)
18.6 Data lists
Name
Name
331