Siemens SINUMERIK 802D sl Function Manual page 294

Punching and Nibbling (N4)
15.5 Rotatable tool
Programming example:
:
N2 TANG (C, X, Y, 1, "B")
N5 G0 F60 X10 Y10
N8 TRAILON (C1, C, 1)
N9 TANGON (C, -90)
N10 G02 X30 Y30 I20 J0 SPN=2 PON
N15 G0 X70 Y10 SPOF
N17 TANGON (C, 90)
N20 G03 X35,86 Y24,14 CR=20 SPP=16 SON
N25 G0 X74,14 Y35,86 C0 PON
N27 TANGON (C, 0)
N30 G03 X40 Y50 I-14,14 J14,14 SPN=5 SON
N35 G0 X30 Y65 C90 SPOF
N40 G91 X-10 Y-25 C180
N43 TANGOF
N45 G90 G02 Y60 I0 J10 SPP=2 PON
N50 SPOF
N55 TRAILOF (C1, C)
N60 M2
294
; Define master and slave axes, C is
slave axis for X and Y in the base
coordinate system
; Start position
; Activate coupled motion of rotatable
tool axes C/C1 for punch and die.
; Activate tangential control with
offset 270°
; Circular interpolation with path
segmentation, two strokes are executed
with 270° offset angle and tangential
alignment along circular path
; Position
; Activate tangential control with
offset 90°
; Circular interpolation, path
segmentation, four strokes are
executed with 90° offset angle and
tangential alignment along circular
path
; Rotation of tool axes to 0°, stroke
; Activate tangential control with
offset 0°
; Circular interpolation, path
segmentation, five strokes with 0°
offset angle and tangential alignment
along circular path
; Position without active tangential
control
; Positioning, C axis rotates to 270°
; Deactivate tangential control
; Circular interpolation, path
segmentation, two strokes without
tangential control where C=270°
; Punching OFF
; Deactivate coupled motion of rotatable
tool axes C/C1
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Turning, Milling, Nibbling