Siemens SINUMERIK 802D sl Function Manual page 286

Punching and Nibbling (N4)
15.4 Automatic path segmentation
MD26016 PUNCH_PARTITION_TYPE = 0 (default setting)
With this setting, the axes behave as standard, i.e. the programmed special axis motions are
distributed among the generated intermediate blocks of the active path segmentation
function in all interpolation modes.
In block
axis response is the same in block
each with 15° axis rotation).
286
, the C axis is rotated through 15° in each of the three intermediate blocks. The
N20
, in the case of circular interpolation (three sub-blocks,
N30
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Turning, Milling, Nibbling