Rear Exhaust Pipe - Subaru Legacy 2003 Service Manual

4. Rear Exhaust Pipe

A: REMOVAL
1) Separate rear exhaust pipe from center exhaust
pipe.
CAUTION:
Be careful, exhaust pipe is hot.
2) Separate rear exhaust pipe from muffler.
CAUTION:
Be careful not to pull down rear exhaust pipe.
3) Remove rear exhaust pipe.
REAR EXHAUST PIPE
B: INSTALLATION
NOTE:
Replace gaskets and self-locking nuts with new
ones.
1) Install rear exhaust pipe to muffler.
Tightening torque:
FU-00455
2) Install rear exhaust pipe to center exhaust pipe.
Tightening torque:
EX-00051
C: INSPECTION
1) Make sure there are no exhaust leaks from con-
nections and welds.
2) Make sure there are no holes or rusting.
EX(H4SO)-9
48 N·m (4.9 kgf-m, 35.4 ft-lb)
18 N·m (1.8 kgf-m, 13.0 ft-lb)
EXHAUST
EX-00051
FU-00455