Subaru Legacy 2003 Service Manual page 956

6. Camshaft Position Sensor
A: REMOVAL
1) Disconnect battery ground cable.
2) Remove air cleaner.
<Ref. to IN(H6DO)-5, REMOVAL, Air Cleaner.>
3) Remove ground cable from fuel pipe protector
RH.
4) Remove fuel pipe protector RH.
5) Disconnect connector from camshaft position
sensor.
CAMSHAFT POSITION SENSOR
FU-00009
FU-00554
FU-00555
FU(H6DO)-31
FUEL INJECTION (FUEL SYSTEMS)
6) Remove camshaft position sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
• Camshaft position sensor;
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
• Fuel pipe protector RH;
19 N·m (1.9 kgf-m, 14 ft-lb)
FU-00576