Subaru Legacy 2003 Service Manual page 958

8. Throttle Position Sensor
A: REMOVAL
1) Disconnect battery ground cable.
2) Remove air intake chamber. <Ref. to IN(H6DO)-
6, REMOVAL, Air Intake Chamber.>
3) Disconnect connector from throttle position sen-
sor.
4) Remove throttle position sensor holding screws,
and remove throttle position sensor itself.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
1.6 N·m (0.16 kgf-m, 1.2 ft-lb)
THROTTLE POSITION SENSOR
FU-00535
FU-00538
FU-00538
FU(H6DO)-33
FUEL INJECTION (FUEL SYSTEMS)