Muffler - Subaru Legacy 2003 Service Manual

Hide thumbs Also See for Legacy 2003:

Table of Contents

5. Muffler

1) Separate muffler from rear exhaust pipe.

Be careful, exhaust pipe is hot.

2) Remove left and right rubber cushions.

Be careful not to drop the muffler during remov-

To facilitate removal, apply a coat of SUBARU

CRC to mating area of rubber cushions in advance.

SUBARU CRC (Part No. 004301003)

3) Remove front rubber cushion, and detach muf-

fler assembly.

To facilitate removal, apply a coat of SUBARU

CRC to mating area of rubber cushion in advance.

SUBARU CRC (Part No. 004301003)

B: INSTALLATION

1) Install in the reverse order of removal.

Replace gasket and self-locking nuts with new

Tightening torque:

C: INSPECTION

1) Make sure there are no exhaust leaks from con-

nections and welds.

2) Make sure there are no holes or rusting.

3) Make sure the cushion rubber is not worn or

48 N·m (4.9 kgf-m, 35.4 ft-lb)

Table of Contents