Rear Exhaust Pipe - Subaru 2004 FORESTER Service Manual

4. Rear Exhaust Pipe

A: REMOVAL
1) Separate the rear exhaust pipe from center ex-
haust pipe.
CAUTION:
Be careful, the exhaust pipe is hot.
2) Separate the rear exhaust pipe from muffler.
3) Apply a coat of SUBARU CRC to mating area of
the cushion rubbers in advance.
SUBARU CRC (Part No. 004301003)
4) Remove the rear exhaust pipe bracket from the
cushion rubber.
Rear Exhaust Pipe
B: INSTALLATION
1) Apply a coat of SUBARU CRC to mating area of
the cushion rubbers in advance.
SUBARU CRC (Part No. 004301003)
2) Install the rear exhaust pipe bracket to cushion
rubber.
EX-00037
NOTE:
Replace the gaskets with new ones.
3) Install the rear exhaust pipe to muffler.
Tightening torque:
48 N
EX-00024
4) Install the rear exhaust pipe to center exhaust
pipe.
Tightening torque:
18 N
EX-00025
EX(H4SO)-11
⋅
m (4.9 kgf-m, 35.4 ft-lb)
⋅
m (1.8 kgf-m, 13.0 ft-lb)
EXHAUST
EX-00025
EX-00024
EX-00037