Subaru Legacy 2003 Service Manual page 161

FUEL INJECTION (FUEL SYSTEMS)
CAUTION:
A helper is required to perform this work.
3) Connect the two-way valve hose (A) to two-way
valve, and then connect the evaporation hose (B)
to evaporation pipe.
( A )
4) Connect the fuel filler hose (A) and air vent hose
(B).
( B )
5) Tighten the band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
FUEL TANK
FU-00468
( B )
FU-00674
( A )
FU-00675
FU-00468
FU(H4SO)-54
6) Install the rear side protector.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
LH side
7) Install the rear suspension assembly.
CAUTION:
A helper is required to perform this work.
(1) Support the rear suspension assembly, and
then tighten the bolts which secure rear suspen-
sion assembly.
Tightening torque:
T1: 172 N·m (17.5 kgf-m, 127 ft-lb)
T2: 108 N·m (11.0 kgf-m, 80 ft-lb)
T3: 66 N·m (6.7 kgf-m, 48 ft-lb)
T1
T2
T2
T2
RH side
FU-00465
T1
T3
T3
T3
FU-00506