Rear Exhaust Pipe - Subaru Impreza 2003 Service Manual

EXHAUST

4. Rear Exhaust Pipe

A: REMOVAL
1) Separate the rear exhaust pipe from center ex-
haust pipe.
CAUTION:
Be careful, the exhaust pipe is hot.
2) Separate the rear exhaust pipe from muffler.
CAUTION:
Be careful not to pull down the rear exhaust
pipe.
3) Apply a coat of SUBARU CRC to mating area of
cushion rubbers in advance.
SUBARU CRC (Part No. 004301003)
4) Remove the rear exhaust pipe bracket from
cushion rubber.
B: INSTALLATION
1) Apply a coat of SUBARU CRC to mating area of
cushion rubbers in advance.
SUBARU CRC (Part No. 004301003)
REAR EXHAUST PIPE
2) Install the rear exhaust pipe bracket to cushion
rubber.
NOTE:
Replace the gaskets with new ones.
3) Install the rear exhaust pipe to muffler.
Tightening torque:
EX-00031
48 N·m (4.9 kgf-m, 35.4 ft-lb)
4) Install the rear exhaust pipe to center exhaust
pipe.
EX-00024
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
C: INSPECTION
1) Make sure there are no exhaust leaks from con-
nections and welds.
EX-00126
2) Make sure there are no holes or rusting.
3) Make sure the cushion rubber is not worn or
cracked.
EX(H4SOw/oOBD)-10
EX-00126
EX-00024
EX-00031