Air Cleaner Element - Subaru Legacy 2003 Service Manual

PERIODIC MAINTENANCE SERVICES

10.Air Cleaner Element

A: REPLACEMENT
1. 2.0 L NON-TURBO AND 2.5 L MODEL
1) Remove the air intake duct from air cleaner
case.
2) Remove the bolt (A) which installs air cleaner
case to stays.
3) Remove the clip (B) above the air cleaner case.
(B)
4) Remove the air cleaner element.
5) Install in the reverse order of removal.
NOTE:
Fasten with a clip after inserting the lower tab of the
case.
AIR CLEANER ELEMENT
(A)
(B)
(B)
IN-00039
PM-00087
PM-20
2. 2.0 L TURBO AND 3.0 L MODEL
1) Loosen clamp (A), and separate air cleaner up-
per cover and air intake boot. (3.0 L model)
2) Remove the clip (B) above the air cleaner upper
cover.
• 3.0 L model
( A )
( B )
( B )
• 2.0 L turbo model
(B)
3) Remove air cleaner element.
4) Install in the reverse order of removal.
NOTE:
Before installing air cleaner upper cover, align
holes with protruding portions of air cleaner lower
case, then secure upper cover to lower case.
PM-00126
PM-00099
PM-00127