Subaru Legacy 2003 Service Manual page 178

FUEL DELIVERY, RETURN AND EVAPORATION LINES
NOTE:
Replace the retainer with new ones.
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel delivery and
return lines.
NOTE:
• Always use a new retainer.
• Make sure that the connected portion is not dam-
aged or has dust. If necessary, clean the seal sur-
face of pipe.
(A) Seal surface
(1) Set a new retainer (B) to connector (A).
(2) Push the pipe into connector completely.
NOTE:
At this time, two clicking sounds are heard.
( B )
( C )
FU-00124
NOTE:
• Pull the connector to ensure it is connected se-
curely.
• Ensure the two retainer pawls are engaged in
their mating positions in the connrcotr.
• Be sure to inspect the hoses and their conections
leakage of fuel.
FU-00125
2) Connect the fuel delivery hose to pipe with an
overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When fitting length is specified.
Type B: When fitting length is not specified.
2 : 2.5 ± ± ± ± 1.5 mm (0.098 ± ± ± ± 0.059 in)
FU(H4SO)-71
FUEL INJECTION (FUEL SYSTEMS)
( A )
(A) Connector
(B) Retainer
(C) Pipe
( A )
(A) Connector
(B) Retainer
(C) Pipe
( B )
( C )
FU-00126
( B )
( C )
FU-00127