Rear Exhaust Pipe - Subaru Legacy 2005 Service Manual

Hide thumbs Also See for Legacy 2005:

Table of Contents

4. Rear Exhaust Pipe

1) Separate the rear exhaust pipe from center ex-

2) Separate the rear exhaust pipe from muffler.

Be careful not to pull down the rear exhaust

• RH side (2.5 L model)

3) Apply a coat of spray type lubricant to the mating

area of cushion rubber.

Rear Exhaust Pipe

4) Remove the rear exhaust pipe bracket from

cushion rubber.

B: INSTALLATION

1) Apply a coat of spray type lubricant to the mating

area of cushion rubber.

2) Install the rear exhaust pipe bracket to cushion

3) Install the rear exhaust pipe to muffler.

Use a new gasket and self-locking nut.

Tightening torque:

EX(H4SO 2.0)-10

m (4.9 kgf-m, 35.4 ft-lb)

Table of Contents