Subaru Legacy 2003 Service Manual page 737

FUEL INJECTION (FUEL SYSTEMS)
11.Fuel Injector
A: REMOVAL
1. RH SIDE
1) Release fuel pressure.
<Ref. to FU(H4SOw/oOBD)-45, RELEASING OF
FUEL PRESSURE, OPERATION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
3) Disconnect battery ground cable.
4) Remove air intake duct and air cleaner assem-
bly. <Ref. to IN(H4SO)-7, REMOVAL, Air Intake
Duct.> and <Ref. to IN(H4SO)-6, REMOVAL, Air
Cleaner Case.>
5) Remove resonator
IN(H4SO)-8, REMOVAL, Resonator Chamber.>
6) Remove spark plug cords from spark plugs (#1
and #3 cylinders).
7) Remove power steering pump and tank from
brackets.
(1) Remove front V-belt covers.
<Ref. to ME(H4SO)-41, REMOVAL, V-belt.>
FUEL INJECTOR
FU-00009
chamber. <Ref.
FU-00302
FU(H4SOw/oOBD)-34
(2) Remove bolts which hold power steering
pipes onto intake manifold protector.
(3) Remove bolts which install power steering
pump to bracket.
to
(4) Disconnect connector from power steering
pump switch.
(5) Remove power steering tank from the
bracket by pulling it upwards.
FU-00718
FU-00139
FU-00428
FU-00429