Subaru Legacy 2003 Service Manual page 160

21) Remove the rear suspension assembly.
CAUTION:
A helper is required to perform this work.
(1) Support the rear differential with transmis-
sion jack.
(2) Remove the bolt which holds rear shock ab-
sorber to rear suspension arm.
(3) Remove the bolts which secure rear sus-
pension assembly to body.
(4) Remove the rear suspension assembly.
22) Remove the rear side protector.
LH side
FUEL TANK
FU-00463
FU-00464
RH side
FU-00465
FU(H4SO)-53
FUEL INJECTION (FUEL SYSTEMS)
23) Disconnect the two-way vlave hose (A) from
two-way valve, and then disconnect the evapora-
tion hose (B) from evaporation pipe.
( A )
24) Loosen the clamp and disconnect the fuel filler
hose (A) and air vent hose (B) from fuel filler pipe.
( B )
25) Support the fuel tank with transmission jack,
then remove the bolts from bands and dismount
fuel tank from the vehicle.
CAUTION:
A helper is required to perform this work.
B: INSTALLATION
1) Support the fuel tank with transmission jack, and
then push the fuel tank harness into access hole
with grommet.
2) Set the fuel tank, and then temporarily tighten
the bolts of fuel tank bands.
( B )
FU-00674
( A )
FU-00675
FU-00468