Engine Assembly - Subaru Legacy 2003 Service Manual

MECHANICAL

9. Engine Assembly

A: REMOVAL
1) Set the vehicle on lift arms.
2) Open the front hood fully, and then support with
the hood stay.
3) Lower the fuel pressure. <Ref. to FU(H4SO)-48,
RELEASING OF FUEL PRESSURE, OPERA-
TION, Fuel.>
4) Disconnect the A/C pressure hoses from A/C
compressor.
5) Remove the fuel filler cap.
6) Disconnect the ground cable from battery.
7) Remove the air intake duct and air cleaner case.
<Ref. to IN(H4SO)-7, REMOVAL, Air Intake Duct.>
and <Ref. to IN(H4SO)-6, Removal, Air Cleaner
Case.>
8) Remove the under cover.
9) Remove the radiator from vehicle. <Ref. to
CO(H4SO)-23, REMOVAL, Radiator.>
10) Remove the air cleaner case stay.
• MT VEHICLES
• AT VEHICLES
ENGINE ASSEMBLY
11) Disconnect the following connectors and ca-
bles.
(1) Front oxygen (A/F) sensor connector
(2) Rear oxygen sensor connector
FU-00009
(3) Engine ground cable
ME-00204
ME-00688
ME(H4SO)-32
EX-00029
EX-00030
ME-00206