Subaru Legacy 2003 Service Manual page 770

FUEL DELIVERY, RETURN AND EVAPORATION LINES
25.Fuel Delivery, Return and Evaporation Lines
A: REMOVAL
1) Set the vehicle on the lift.
2) Release the fuel pressure. <Ref. to FU(H4SOw/oOBD)-45, RELEASING OF FUEL PRESSURE, OPER-
ATION, Fuel.>
3) Open the fuel filler flap lid, and then remove the fuel filler cap.
4) Remove the floor mat. <Ref. to EI-48, REMOVAL, Floor Mat.>
5) Remove the fuel delivery pipes and hoses, fuel return pipes and hoses, evaporation pipes and hoses.
6) In engine compartment, detach the fuel delivery
hoses, return hoses and evaporation hose.
7) Lift-up the vehicle.
8) Disconnect the two-way valve hose (A) from the
two-way valve and disconnect evaporation hose
(B) from evaporation pipe.
FU-00032
FU(H4SOw/oOBD)-67
FUEL INJECTION (FUEL SYSTEMS)
( A )
FU-00687
( B )
FU-00674