Flowmeter Installation Types and Components
B.3
Model 1700/2700 transmitters
B.3.1
Installation diagrams
Model 1700/2700 transmitters can be installed in four different ways:
•
Integral
•
4-wire remote
•
9-wire remote
•
Remote core processor with remote transmitter
See Figure B-8.
B.3.2
Component diagrams
Figure B-9 shows the transmitter and core processor components in integral installations.
Figure B-10 shows the transmitter components in 4-wire remote installations and remote core
processor with remote transmitter installations.
Figure B-11 shows the transmitter/core processor assembly in 9-wire remote installations.
In remote core processor with remote transmitter installations, the core processor is installed
stand-alone. See Figure B-12.
B.3.3
Wiring and terminal diagrams
In 4-wire remote and remote core processor with remote transmitter installations, a 4-wire cable is
used to connect the core processor to the transmitter's mating connector. See Figure B-13.
In 9-wire remote installations, a 9-wire cable is used to connect the junction box on the sensor to the
terminals on the transmitter/core processor assembly. See Figure B-15.
Figure B-16 shows the transmitter's power supply terminals.
Figure B-16 shows the output terminals for the Model 1700/2700 transmitter.
174
Micro Motion Series 1000 and Series 2000 Transmitters