Measurement Performance
Figure 10-2
Meter verification test, original version – Display
(1)
UNSTABLE FLOW
Correct condition
Scroll
(1) Either Unstable Flow or Unstable Drive Gain may be displayed, indicating that the
standard deviation of the flow or drive gain is outside limits.
(2) Represents the percentage completion of the procedure.
Configuration and Use Manual
Scroll and Select simultaneously
for 4 seconds
Scroll
OFF-LINE MAINT
Select
Scroll
SENSOR VERFY
Select
OUTPUTS
Select
Choose output setting
STOP MSMT/YES?
Select
Scroll
. . . . . . . . . . . . . . . x%
PASS
Scroll
Scroll
SENSOR EXIT
(2)
CAUTION
ABORT
Scroll
Scroll
RERUN/YES?
No
Yes
Correct condition
Scroll
Select
103